Clearing Performance Statistics; H Status Information; H System Status Messages - Paradyne 9161 User Manual

Displaying System Information

Clearing Performance Statistics

Status Information
System Status Messages
7-16
Use the following menu sequence to clear performance statistics.
Main Menu Status
You can also use the ClrStats function at the bottom of the Performance Statistics
screen.
To clear all . . .
User performance registers, including
network and ports statistics
User performance registers for the
selected Network Interface
Performance registers for all Sync Data
ports
NOTE:
You can only clear User statistics. Telco statistics cannot be cleared.
Select system and test status information from the Status menu:
Main Menu Status
These messages, listed in alphabetical order, appear in the messages area at the
bottom of the screens (see Table 7-1).
Table 7-1. System Status Messages (1 of 2)
Message What It Indicates
Already Active The selected test is currently
running.
Command Complete A system command (save,
clear, abort) completed
normally.
Connection Refused User interface is in use. This
will only appear during
initiation of a Telnet session.
Clear Statistics
Select . . .
All
Network 1 or Network 2 (only the Model
926x provides Network 2)
All Sync Data Ports
System and Test Status
April 1999
What To Do
1. Allow test to continue.
2. Stop the test.
No action needed.
Wait and try again.
9161-A2-GH30-40