H Setting Up And Placing A Call - Paradyne 9161 User Manual

Setting Up
Setting Up and Placing a Call
"
5-78
Configure your external device. Then, use the Call Setup screen to:
H
Look up the desired telephone number
H
Dial a call
H
Disconnect a call
Procedure
1. Follow this menu selection sequence:
Main Control
2. The Control menu appears. Select Call Setup and press Enter.
3. The Call Setup screen appears. Enter the number of the directory containing
the desired telephone number in the Directory Number field. The telephone
number appears in the Directory Phone Number field. See
Directory Numbers and
Troubleshooting and Maintenance , for information about the call directory.
4. Select Dial and press Enter to initiate dialing.
5. To end the call, select Disconnect and press Enter.
Call Setup
Changing Directory Numbers
April 1999
Displaying
in Chapter 9,
9161-A2-GH30-40