Automatic Dialing Out When An Alarm Occurs - Paradyne 9161 User Manual

Automatic Dialing Out When an Alarm Occurs

"
9161-A2-GH30-40
You can control whether generated alarm messages will initiate a call if a
connection on the COM port external device has not already been established.
To dial out when an alarm occurs you must:
H
Connect the modem to the COM port using the appropriate cable.
H
Select the ASCII alarms to receive for each interface.
H
Configure the phone directory to use for Dial Out Alarms.
H
Enable Alarm & Trap Dial Out.
H
Enable Call Retry, if desired.
Procedure
To enable the desired ASCII alarms for each interface:
1. Follow this menu selection sequence to display the Load Configuration From
screen:
Main Menu Configuration
2. Select the desired configuration area and press Enter. The Configuration
Edit/Display screen appears.
3. Select the ASCII alarms to enable for the interface.
To enable . . .
T1 alarms
DSX-1 alarms
Sync Data Ports alarms
OCU-DP Ports alarms
4. Configure the phone directory to use for dialing out alarms (see
Directory Numbers and
and Maintenance) .
5. Select Alarm from the Configuration Edit/Display menu and press Enter. The
Alarms Options screen appears.
To . . .
Automatically initiate a call (dial out)
Retry the call if the call cannot be
completed
Enable ASCII alarms
Set the configuration option(s) . . .
Configuration
Configuration
Configuration
Configuration
Changing Directory Numbers
Set the configuration option . . .
Alarm & Trap Dial-Out to Enable.
Call Retry to Enable.
Configuration
April 1999
Troubleshooting
Network
DSX-1
Sync Data Ports
OCU-DP Ports
Displaying
in Chapter 8, Operation
Alarm
9-19