Paradyne 9161 User Manual page 113

Setting Up
Table 5-11. External Device (COM Port) Options (3 of 3)
Disconnect String
Possible Settings: ASCII text entry, Clear
Default Setting: Clear
Specifies the command used to disconnect an external device. Only used by the
T1 access unit when External Device Commands is set to Other.
ASCII Text Field – Adds to or changes the Disconnect String (maximum 20 characters).
Refer to the Control Characters table on page 5-60.
Clear – Clears and sets the Disconnect String.
H
Disconnect String only appears if External Device Commands is set to Other.
5-59
9161-A2-GH30-40 April 1999