Page 1
Change to the Cable Installation Replace the procedure in the Connecting to Analog Voice Equipment section of the following documents: 9109 E&M Analog Voice Application Module (APM) Installation Instructions (Document No. 9109-A2-GN11-00) 9109 FXS Analog Voice Application Module (APM) Installation Instructions (Document No.
Page 2
5. Wrap the long end of the cable tie around the cable, and feed it through the other end of the cable tie, tightening the cable to the anchor mount, then clipping the excess. 6. Connect the other end of the cable to the M66 block. Anchor Mount 50-Pin Connector Jack-Screw 496-15181 November 1996 9109-A2-GK40-00...
Page 3
The following illustrations show fully connected voice ports. M66 Block 496-15151 Voice APMs 9109-A2-GK40-00 Voice APM's M66 Blocks E&M November 1996 M66 Block 496-15171 Signal Ground and Battery 496-15172...