H Displaying Voice Apm Status - Paradyne 9161 User Manual

Displaying Voice APM Status
"
9161-A2-GH30-40
Chapter 7, Maintenance and Troubleshooting
messages and recommended action for you to take. Use the following menu
sequence to display system and test status information.
Main Menu Status
Use the Voice APM Status screen to display information concerning voice cards
that you have installed in your system.
Procedure
1. Follow this menu sequence to display the Voice APM Status screen.
Main Menu Status
2. Enter the slot number of the desired voice APM in the SLOT field. The Voice
Port Status screen differs, depending on whether you are accessing an E&M,
FXO or FXS Voice APM.
View this field . . .
For the E&M Voice APM
Port Status
Assigned To
Operating Mode
Signaling Type
Call Progress
TX ABCD bits
RX ABCD bits
E-Lead State
M-Lead State
Trunk Cond CGA
, contains a list of all status
System and Test Status
Voice Status
To find the . . .
Status of the port.
Interface the port is assigned to.
Operating mode of the voice port that was configured
using the Operating Mode configuration option on the
Voice Ports screen.
Type of signaling used by the voice port that was
configured using the switches on the E&M APM. See
the 9109 E&M Analog Voice Application Module (APM)
Installation Instructions for more information.
Current condition of the port.
Current value of the ABCD bits that are being
transmitted to the T1 interface.
Current value of the ABCD bits that are being received
from the T1 interface.
Current status of the E-lead (On or Off).
Current status of the M-lead (On or Off).
Displays the status of trunk conditioning (On for CGA,
Off for no CGA).
April 1999
Displaying System Information
7-3