Dds Csu/Dsu Latching/Nonlatching Loopback - Paradyne 9161 User Manual

DDS CSU/DSU Latching/Nonlatching Loopback

9161-A2-GH30-40
The Latching/Nonlatching Loopback sends the selected loopback sequence to
the CPE attached to the port.
Allows testing of a local loop between
the selected port and the CPE
This loopback
running at . . .
Latching 64K Clear Channel
Nonlatching 56K
DSU Latching
and Nonlatching
OCU
Loopback
APM
DDS
OCU
CSU
Port
DSU
CSU Latching
and Nonlatching
Loopback
The following tests are the only tests allowed to run at the same time as a
Latching/Nonlatching Loopback. No other tests can be running when a
Latching/Nonlatching Loopback test is initiated:
H
Send Pattern/Monitor Pattern Test on any data port assigned to this interface
T1
NAM
Network
Interface
98-15958
April 1999
Troubleshooting
Loopback
Direction
types
CSU or DSU up or down
CSU or DSU –
9-39