Line Loopback - Paradyne 9161 User Manual

Line Loopback

9161-A2-GH30-40
The Line Loopback tests the local loop between the OCU port and the attached
CPE. The loopback occurs on the APM near the local loop interface, toward the
local loop.
OCU
APM
Line
Loopback
OCU
Port
The following tests are the only tests allowed to run at the same time as a Line
Loopback. No other tests can be running when a Line Loopback test is initiated:
H
OCU Loopback
H
DS-0 Loopback
H
Line Loopback on the cross-connected T1 interface
H
Payload Loopback on the cross-connected T1 interface
T1
NAM
Network
Interface
All 1s
98-15961
April 1999
Troubleshooting
9-41