Snmp Cross-Reference - Paradyne 9161 User Manual

SNMP Cross-Reference

Table D-1. SNMP MIB to User Interface Command Cross-Reference (1 of 16)
User Interface Command
STATUS
main/status/system Health & Status:
Power Supply Alarm
LOS at Net/DSX-1
OOF at Net/DSX-1
AIS at Net/DSX-1
EER at Net
Yellow at Net/DSX-1
APM Card Failed
Module MisConfig
Module Unsupported
OOF (EDL)
Out of Sync, Slot xx Group g
EER (EDL)
Loss of Signal, ss-p
Abnormal Station Code, ss-p
64KCC Loop OOF, ss-p
DDS Net Failure xxxxxx , ss-p
Loss of Loop Timing, ss-p
Primary Clock Failed
Secondary Clock Failed
Network Com Link Down
Device Fail
main/status/system Self-Test Results:
All Self-Test Results
9161-A2-GH30-40
This appendix provides a correlation between how a function is performed or
status is displayed on the user interface and how the same function is
accomplished using access to the SNMP database (Table D-1). SNMP objects
are displayed in bold type while values for SNMP objects are displayed in italics .
SNMP MIB Object
Read:
devHealthAndStatus
dsx1LossOfSignal from dsx1LineStatus for interface
dsx1LossOfFrame from dsx1LineStatus for interface
dsx1RcvAIS from dsx1LineStatus for interface
dsx1OtherFailure from dsx1LineStatus for interface
dsx1RcvFarEndLOF from dsx1LineStatus for interface
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
devHealthAndStatus
down from ifOperStatus for the COM port interface
devHealthAndStatus
Read:
devSelfTestResults
April 1999
D
D-1