H Adding System Identity Information - Paradyne 9161 User Manual

Adding System Identity Information
"
9161-A2-GH30-40
Use the Device Name screen to identify this system, and to change or display the
general name, location, and contact for the system.
Procedure
1. Follow this menu selection sequence:
Main Menu Control
2. Use the Tab key to move the cursor to the field where you want to add or
change information.
NOTE:
To clear existing information, place the cursor in the Clear field and press
Enter.
If the selection is . . .
Device Name
System Name
System Location
System Contact
3. To save changes, select Save and press Enter.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen.
Device Name
Enter the . . .
Unique name for device identification of up to
20 characters.
SNMP system name; can be up to 255 characters.
Your system's physical location; can be up to
255 characters.
Name and how to contact the person responsible for this
system; can be up to 255 characters.
April 1999
Setting Up
5-3