Paradyne 9161 User Manual page 240

Menus and Configuration Worksheets
A-14
Device Name: ___________________________________________________________
Management and Communication
Configuration Option
Communication Protocol
1
Node IP Address
Node Subnet Mask
Default Network Destination
Communication Port IP Address
Communication Port Subnet Mask
Communication Port Link Protocol
Alternate Communication Port IP
1
Address
Alternate Communication Port
Subnet Mask
General SNMP Management
SNMP Management
Community Name 1
Name 1 Access
Community Name 2
Name 2 Access
SNMP NMS Security
NMS IP Validation
Number of Managers
1
NMS n IP Address
Access Level
SNMP Traps
SNMP Traps
Number of Trap Managers
1
NMS n IP Address
Destination
General Traps
Enterprise Specific Traps
Link Traps
Link Traps Interfaces
1
The first byte cannot be set to 0 nor 127. However, the null address of 0.0.0.0 is valid
after performing a Clear.
Settings
See Table 5-14
[000.000.000.000] – 223.255.255.255, Clear
[000.000.000.000] – 255.255.255.255, Clear
[None], COM, FDL1, FDL2, DDL, EDL ss-p
1
[000.000.000.000] – 223.255.255.255, Clear
[000.000.000.000] – 255.255.255.255, Clear
[PPP], SLIP
[000.000.000.000] – 223.255.255.255, Clear
[000.000.000.000] – 255.255.255.255, Clear
See Table 5-15
Enable, [Disable]
ASCII text entry [Public], Clear
[Read], Read/Write
ASCII text entry, [Clear]
[Read], Read/Write
See Table 5-16
Enable, [Disable]
[1] – 10 [1]
[000.000.000.000] – 223.255.255.255, Clear
[Read], Read/Write
See Table 5-17
Enable, [Disable]
[1] – 6 [1]
[000.000.000.000] – 223.255.255.255, Clear
[Default], COM, FDL1, FDL2, DDL, EDL ss-p
Disable, Warm, AuthFail, [Both]
Enable, [Disable]
Disable, Up, Down, [Both]
Network, DSX-1, T1s, Ports, [All]
April 1999
Default in [Bold]
9161-A2-GH30-40