Displaying Dsx-1 Channels - Paradyne 9161 User Manual

Displaying System Information

Displaying DSX-1 Channels

4-6
Slot Assignment information. NAM or APM physical slot assignment
information appears below the time slot fields.
The following information is available for viewing.
Physical Slot . . .
01 to 05 (based on model)
Use the Network Channel Display screen to display all of the DS0 assignments
for each DS0 on the DSX-1 interface. This screen also provides information on
the slot assignment for each NAM or APM type.
Use the following menu sequence to display DSX-1 channel information.
Main Menu Status
NOTE:
The DSX-1 Channel screen will not appear if the Interface Status
field on the DSX-1 Interface Option screen is set to Disable.
The DSX-1 Channel Display screen displays 24 two-field entries in three rows.
Together, each two-field entry defines the assignment for one DSX-1 interface
time slot. The top field represents the time slot of the DSX-1 Interface. The
bottom field represents the cross-connect status of the associated (top field)
DSX-1 time slot.
The following information is available for viewing.
The DSX-1 Time Slot Fields (top) . . .
D01 to D24
November 1996
Identifies the assigned card type . . .
T1 NAM – T1 NAM.
Sync Data – 4-port synchronous data APM.
E&M Voice – 8-port E&M Voice APM.
FXS Voice – 8-port FXS Voice APM.
Empty – The slot is empty.
Misconfig – The slot contains a misconfigured APM.
Unsupport – The slot contains an unrecognized APM.
Cross Connect Status
Indicate . . .
The DSX-1 Interface time slot (01 to 24).
DSX-1 Channel Display
9161-A2-GB20-00