Paradyne 9161 User Manual page 90

Setting Up
Assigning Cross Connections
5-36
The system allows you to assign data paths between the various interfaces to
share the T1 network. Assuming that both the Network and DSX-1 interfaces are
enabled and that at least one voice port APM is installed, you can make the
following cross connections:
H
Assign DSX-1 time slots to the Network interface
H
Assign Network 2 interface time slots to the Network 1 interface
H
Assign voice ports to DSX-1 or Network interface time slots
H
Assign Sync Data ports to DSX-1 or Network interface time slots, or to
another Sync Data port
H
Assign OCU-DP data ports to DSX-1 or Network interface time slots
You can also clear cross-connection assignments.
NOTE:
Although it is not required, it is suggested that you progress through each
screen in order, from top to bottom.
April 1999 9161-A2-GH30-40