Paradyne 9161 User Manual page 199

9161-A2-GH30-40
Table 9-1. ASCII Alarm Messages (5 of 5)
Message
month/day/year
hours:minutes:seconds –
A Primary Clock Source
Failure has occurred.
month/day/year
hours:minutes:seconds –
Alarm Cleared for a
Primary Source Failure.
month/day/year
hours:minutes:seconds –
A Secondary Clock Source
Failure has occurred.
month/day/year
hours:minutes:seconds –
Alarm Cleared for a
Secondary Source Failure.
month/day/year
hours:minutes:seconds –
A 64KCC Loop Out of
Frame has been detected
at OCU-DP port in slot ss
port p .
month/day/year
hours:minutes:seconds –
Alarm Cleared for a 64KCC
Loop Out Of Frame at
OCU-DP port in slot ss
port p .
April 1999
What It Indicates What To Do
The primary clock 1. If the primary clock
source has failed. The
system is operating
from the secondary
clock source.
2. Check the clock
Alarm condition no No action needed.
longer exists.
The secondary clock 1. If the secondary
source has failed. The
system is operating
from the internal clock.
2. Check the clock
Alarm condition no No action needed.
longer exists.
A continuous There is a network
out-of-frame condition problem with the
occurred on the fractional portion of
OCU-DP port for the the link carrying this
identified slot and port. port's data. Contact
network provider.
Alarm condition no No action needed.
longer exists.
Troubleshooting
Priority
22
was derived from
the network,
contact the network
provider.
source. Contact
your service
representative.
21
clock was derived
from the network,
contact the network
provider.
source. Contact
your service
representative.
18
9-17