H Displaying Apm Identity Information; H Displaying System And Test Status - Paradyne 9161 User Manual

Displaying System Information
Displaying APM Identity Information
"
Displaying System and Test Status
7-2
Use the APM Identity screen to display identification information about a
particular APM. This information is useful if you are purchasing additional or
replacement APMs.
Procedure
1. Follow this menu sequence to display the APM Identity Slot screen.
Main Menu Status
2. Press the spacebar to cycle through the set of slots consisting of the NAM
and all APMs associated with it. The slot order sequence consists of the slot
assignment for the APMs in order from lowest (02) to highest (05 for 5-slot
housing) slot number.
The following information is available for viewing. Use the right and left arrow
keys to scroll additional text into view.
View this field . . .
1
APM Type
Serial Number
Software Revision
Hardware Revision
1
The APM Type field can also display:
Empty – If the APM slot is empty and was not previously configured.
Unsupport – If an unrecognized APM is installed.
Misconfig – If a misconfiguration condition occurs. Refer to
in Chapter 9, Troubleshooting .
Failed – The APM was removed from the slot, or the APM is not operational.
Use the System and Test Status screen to display information concerning:
H
System Health and Status
H
Self-Test results
H
Status of tests currently running
Identity APM
To find the . . .
APM type (Sync Data, DSX-1, E&M Voice, FXS Voice,
FXO Voice, OCU (2) or OCU (6)).
APM's 7-digit serial number.
APM's software version level (6-digit) of the installed
firmware. The software revision will be the same as the
NAM software revision if the APM has no
processor/code of its own.
APM's hardware revision level (7-digit) of the main
circuit card assembly (CCA).
April 1999
ASCII Alarm Messages
9161-A2-GH30-40