Table of Contents
Advertisement
Quick Links
9109 Sync Data Application Module (APM)
Installation Instructions
Document Number 9109-A2-GN10-50
August 2000
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.
Complete documentation for this product is available at www.paradyne.com.
Select Library
NextEDGE Multiservices Access System .
Select the appropriate document:
9161-A2-GB20
Model 916x/926x T1 Access Mux User's Guide
9161-A2-GH30
Model 916x/926x T1 Access Mux Technical Reference
9191-A2-GB20
FrameSaver SLV Multiservices Access Unit, Models 9191, 9192, and 9195, User's
Guide
To order a paper copy of a Paradyne document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
Before You Begin
Make sure you have:
The housing, and any associated hardware, already installed
The housing installation instructions
A T1 NAM already installed in Slot 01 and connected to the network
Applicable cables
A small Phillips screwdriver (#1 or #2) to install the APM
A small, flat-blade screwdriver to install the I/O card and cable connections
Technical Manuals
FrameSaver Frame Relay Devices or
1
Advertisement
Table of Contents
Related Manuals for Paradyne 9109
Summary of Contents for Paradyne 9109
- Page 1 9109 Sync Data Application Module (APM) Installation Instructions Document Number 9109-A2-GN10-50 August 2000 Product Documentation on the World Wide Web We provide complete product documentation online. This lets you search the documentation for specific topics and print only what you need, reducing the waste of surplus printing.
-
Page 2: Package Checklist
See the appropriate product manual for additional information on: Troubleshooting Technical Specifications Connectors, Cables, and Pin Assignments Package Checklist Verify that your package contains the following: 4-Port Sync Data APM 4-Port Sync Data I/O card When your equipment arrives, inspect it for physical damage and tighten any screws that may have worked loose. -
Page 3: Installing The I/O Card
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative. -
Page 4: Connecting To A Dte
Connecting to a DTE If the DTE cable type is EIA-530A: 1. Connect the EIA-530A end of the DTE cable to PORT 1, PORT 2, PORT 3, or PORT 4. EIA-530A Cable V.35, RS-449, V.11/X.21 Adapter Cable If the DTE cable type is V.35, RS-449, or V.11/X.21 (all separately orderable): 1. - Page 5 Removing the Housing’s Bezel 1. Depress the latch at the top of the housing to open the bezel. 2. Lift upward to remove the bezel from the two slots at the bottom of the housing. Save the bezel so it can be reattached once the APM has been installed. NOTE: The power supply is visible once the bezel is removed.
- Page 6 Installing the APM The APM can be installed in any slot except Slot 01. CAUTION: You must insert the Synchronous Data APM in the correct slot so that it mates with its matching I/O card. APMs are keyed so that they mate only with their matching I/O cards.
- Page 7 Removing/Replacing a Card Card removal procedures differ, depending on whether you are removing the APM or I/O card. NOTE: You can insert or remove the APM and its associated I/O card without powering off the equipment and interrupting data flow through other cards in the system. Removing/Replacing an APM 1.
-
Page 8: Warranty, Sales, Service, And Training Information
FrameSaver and NextEDGE are a registered trademarks of Paradyne Corporation. All other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners. Copyright 2000 Paradyne Corporation. Printed in U.S.A. *9109–A2–GN10–50*...