Paradyne 9161 User Manual page 150

Displaying System Information
7-8
The Cross Connect Status Field
(bottom) . . .
D ss - p / yy
D ss - p / yy r
RsvdAPM
DDL
Slot Assignment information. NAM or APM physical slot assignment
information appears below the time slot fields.
The following information is available for viewing.
Physical Slot . . .
01 to 14 (based on model)
02 to 05 (based on model)
Indicates . . .
The DSX-1 on slot ss , port p , time slot yy
is assigned to the Network Interface time
slot (01 to 24).
The DSX-1 on slot ss , port p , time slot yy
is assigned to the Network Interface time
slot (01 to 24), using Robbed Bit Signaling
(r ).
The time slot is assigned to an APM which
is either:
H
failed,
H
removed or not installed, or
H
has been replaced by an APM type that
is not compatible with the configuration.
The time slot is reserved for a
management path using Direct Data Link
(DDL).
Identifies the assigned card type . . .
T1 NAM – T1 NAM.
Empty – The slot is empty.
Sync Data – 4-port synchronous data APM.
DSX-1 – 2-port Dual DSX APM.
E&M Voice – 8-port E&M Voice APM.
FXO Voice – 8-port FXO Voice APM.
FXS Voice – 8-port FXS Voice APM.
OCU (2) – 2-port OCU-DP APM.
OCU (6) – 6-port OCU-DP APM.
Empty – The slot is empty.
Misconfig – The slot contains a misconfigured APM.
Unsupport – The slot contains an unrecognized APM.
Failed – The slot contained an APM that has been
removed or is no longer operational.
April 1999 9161-A2-GH30-40