Routing To Remote T1 Access Units Using Routers - Paradyne 9161 User Manual

IP Addressing

Routing to Remote T1 Access Units Using Routers

B-6
In the following example, each T1 access unit receives its management traffic
through a connection from the COM port to the serial port of a router. In this case,
the units do not route data among themselves, but rely on the IP routers to route
management traffic for the remote T1 access units using data streams configured
between the routers.
Each T1 Access Unit is configured to be on its own subnet, having a subnet mask
of FF.FF.FF.00. This subnet is independent of the subnet on the LAN supported
by the local router.
Subnet 135.18.5.0
135.18.5.2
COM
Router:
Serial
135.18.5.1
Port
Router:
135.18.2..
Subnet 135.18.2.0
Subnet 135.18.6.0
135.18.6.2
COM
Router:
Serial
135.18.6.1
Port
Router:
135.18.3..
Subnet 135.18.3.0
Serial
Port
T1
Network
COM
April 1999
Subnet 135.18.1.0
SNMP NMS
135.18.1.2
Router:
135.18.1.1
Router:
135.18.4.1
135.18.4.2
Subnet 135.18.4.0
497-15196-01
9161-A2-GH30-40