Paradyne 9161 User Manual page 167

9161-A2-GH30-40
Table 7-4. Test Status Messages (2 of 2)
Message
OCU DS-0 LB, Slot ss
Port p
Voice DLB, Slot ss Port p
Voice ALB, Slot ss Port p
Voice LLB, Slot ss Port p
Voice DRS, Slot ss Port p
Voice Quiet, Slot ss Port p
Forced Signal, Slot ss
Port p
Pttn Active, [Network n ]
Pttn Active, [DSX ss-p ]
Pttn Active, [Slot ss Port p ]
Mon Pttn , [Network n ]
Mon Pttn , [DSX ss-p ]
Mon Pttn , [Slot ss Port p ]
Lamp Test Active
April 1999
Displaying System Information
What It Indicates
An DS0 Loopback test is on the OCU-DP interface in
slot ss , port p .
A voice Digital Loopback (DLB) test is active on slot ss ,
port p.
A voice Analog Loopback (ALB) is active on slot ss , port p.
A voice Line Loopback (LLB) test is active on slot ss ,
port p.
A voice Digital Reference (DRS) test is active on slot ss ,
port p.
A voice quiet tone test is active on slot ss , port p.
A forced signaling test is active on slot ss , port p.
A pttn test (test patterns for Network 1 or Network 2 ) is
active on Network n.
A pttn test (test patterns for the DSX-1 interface in slot ss ,
port p ) is active .
A pttn test (test patterns for Sync Data port) is active on
slot ss , port p.
A Monitor pttn (test patterns for the Network 1 or
Network 2) is active on Network n.
A Monitor pttn (test patterns for the DSX-1 interface in
slot ss , port p ) is active .
A Monitor pttn (test patterns for the Sync Data port) is
active on slot ss , port p.
The Lamp Test is active, causing all LEDs on the T1 NAM
and APMs to blink.
7-25