H Displaying Cross Connect Status; Displaying Network Channels - Paradyne 9161 User Manual

Displaying Cross Connect Status

Displaying Network Channels

9161-A2-GH30-40
Slot assignments are made using the Cross Connect configuration option. See
Assigning Cross Connections
assignments. Use the Cross Connect Status screen to display time slot
assignments for:
H
Network Channels
H
DSX-1 Channels
H
Ports
Use the Network Channel Display screen to display DS0 assignments for each
DS0 on the network interface. This screen also provides information on the slot
assignment for each NAM or APM type.
Use the following menu sequence to display network channel information.
Main Menu Status
Select the desired network interface: 1 for Network 1, 2 for Network 2 (only the
Model 926x provides Network 2).
The Network Channel Display screen displays 24 two-field entries in three rows.
Together, each two-field entry defines the assignment for one Network interface
time slot. The top field represents the time slot of the Network Interface. The
bottom field represents the cross connect status of the associated (top field)
network time slot.
The following information is available for viewing.
The Network Time Slot Fields (top) . . .
N01 to N24
The Cross Connect Status Field
(bottom) . . .
Unassgn
S ss P p
Net n / yy
Net n / yy r
in Chapter 5, Setting Up , for making time slot
Cross Connect Status
Indicates . . .
The Network Interface time slot (01 to 24).
Indicates . . .
The time slot is unassigned.
The voice or sync data port ( p ) of slot ( ss )
is assigned to the Network Interface time
slot (01 to 24).
Network n (1 or 2) time slot yy is assigned
to the Network Interface time slot (01 to
24), using Clear Channel.
Network n (1 or 2) time slot yy is assigned
to the Network Interface time slot (01 to
24), using Robbed Bit Signaling (r ).
April 1999
Displaying System Information
Network Channel Display
7-7