Viewing Network Interface Status - Paradyne 7520 User Manual

Monitoring the DSU

Viewing Network Interface Status

Î
Î
4-6
To view the Network Interface Status, follow this menu selection sequence:
Main Menu Status
main/status/interface
Device Name:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Refresh
The network interface status fields are read-only. Table 4-5 describes the
contents of the Network Interface Status screen.
Table 4-5. Network Interface Status Screen Contents
Field Status
Line Rate (Kbps) 64 CC
64 LADS
56
38.4 38 4
19.2
9.6
4.8
2.4 2 4
No Signal
Loop Loss (dB) 0 to – 65 dB
Inoperative
Network Interface Status
NETWORK INTERFACE STATUS
Line Rate (Kbps): 64CC
Loop Loss (dB): –25
ESC for previous menu
8
May 1998
Model: 7520
MainMenu
What the Status Indicates
Line rate on the network interface.
No signal can be detected over the
network interface.
Amount of loop loss. The loss of
signal strength of the receive line
signal from the local loop,
measured in decibels.
The line may be disconnected.
7520-A2-GB20-20
Î Î
Î Î
Exit