Ending A Session - Paradyne 9161 User Manual

Operation and Maintenance

Ending a Session

"
8-4
Use the Exit function key from any screen to terminate the session.
Procedure
To end a session:
1. Press Ctrl-a to go to the screen function key area.
2. Select Exit and press Enter.
If connected through . . . Then the . . .
Direct connection via the
COM port
Telnet or some other
modem connection
3. If ending a configuration editing session, the Save Configuration screen
appears with the Save Changes? prompt.
If you select . . .
No
Yes
Idle screen appears.
Connection is dropped and the screen is cleared.
Then the . . .
Session is terminated without the configuration option
changes being saved.
Save Configuration To screen appears. Select a
configuration option area to save your changes to
(Current, Customer 1, or Customer 2), and press Enter.
Configuration option changes are saved and the
session is terminated.
April 1999 9161-A2-GH30-40