Paradyne 9161 User Manual page 165

9161-A2-GH30-40
Table 7-3. Self-Test Results Messages
Message What It Indicates
CPU Fail The CPU failed internal
testing.
NAM Fail One or more of the NAM's
integrated circuit chips failed
internal device level testing.
Network n T1 Fail The NAM failed to internally
loop data on the selected
Network T1 circuit.
DSX ss-p T1 Fail The NAM failed to internally
loop data on the selected
DSX-1 circuit.
Memory Fail The unit failed memory
verification.
Failure xxxxxxxx An internal failure occurred.
(xxxxxxxx represents an
8-digit hexadecimal failure
code for use by service
personnel.)
Passed No problems were found
during power-up.
April 1999
Displaying System Information
What To Do
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
Record the failure code and
contact your service
representative.
No action needed; no
problems were found during
power-up or reset.
7-23