H Setting Date And Time; H Configuring The T1 Access Unit - Paradyne 9161 User Manual

Setting Up
Setting Date and Time
"
Configuring the T1 Access Unit
5-4
Use the Date & Time screen to set the date and time for the system.
Procedure
1. Follow this menu selection sequence:
Main Menu Control
2. Use the Tab key to move the cursor to the field where you want to add or
change information.
NOTE:
To clear existing information, move the cursor to the Clear field and press
Enter.
If the selection is . . .
Date (mm/dd/yy)
Time (hh:mm)
3. To save changes, select Save and press Enter.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen.
Your system comes preconfigured with factory default settings as noted in the
configuration option tables in this chapter, as well as on the Quick Reference. If
you need to display or change these settings, use the system's Configuration
branch.
To change configuration option settings you must perform the following tasks:
H
Access and display configuration option settings
H
Change configuration option settings
H
Save configurations option settings to a configuration option area
NOTE:
Only Security Access Level 1 users can change configuration options.
Security Access Level 2 and 3 users can just view configuration options.
Date & Time
Enter the . . .
Date in the format mm/dd/yy or mm-dd-yy.
Time (24-hour clock) in the format hh:mm.
April 1999 9161-A2-GH30-40