Assigning Dsx-1 Time Slots To The Network Interface - Paradyne 9161 User Manual

Assigning DSX-1 Time Slots to the Network Interface

9161-A2-GH30-40
DSX-1 time slots are assigned by channel allocation, where you specify individual
time slots. The DSX-1 interface must be enabled to assign DSX-1 time slots to
the Network interface.
Value Meaning
N xx The lower field represents time slot xx of the selected Network
interface.
Assigned The time slot is already assigned to something other than a DSX-1
time slot, so it is unavailable. Assigned time slots cannot be
modified from this screen.
Available The time slot is currently unassigned.
D ss - p / yy Time slot yy of DSX-1 interface p in slot ss is assigned to the
Network time slot identified right above it (N xx ).
Time slot assignment rules:
H
Valid Network time slots are either labeled as Available, or contain a DSX-1
time slot assignment
H
Valid DSX-1 time slots are those that are unassigned, and the currently
assigned time slot
H
Order of display is as follows:
— Available is the first selection
— Then, from lowest DSX-1 interface to the highest DSX-1 interface
— Then lowest available time slot number to the highest available time slot
number
For example, if the cursor is on a field with the Available value under assigned
time slot N xx , pressing the spacebar causes this field's values to cycle through all
valid DSX-1 time slots, starting with D ss - p / yy , assuming it is unassigned. If
D ss - p / yy is already assigned, the next valid time slot in the order described above
is displayed.
April 1999
Setting Up
5-39