Paradyne 9161 Installation Instructions

916x T1 Access Mux Software Release 1 to Software Release 2
Upgrade Instructions
Document Number 9161-A2-GK41-00
September 1997
Package Checklist
Things to Know Before Performing an Upgrade
Upgrade Procedure
9161-A2-GK41-00
TM
The software contained in this package upgrades your software from Release 1
to Release 2. You must use this software upgrade package to give the 9161
Single T1 NAM the capability of using the FXO APM in your T1 access unit.
Verify that your upgrade package contains the following:
Software upgrade diskette
FXO APM feature (see the 9109 FXO Analog Voice Application Module
(APM), Installation Instructions (Document No. 9109-A2-GN14)
You do not need to power down the T1 access unit
All of your configuration option settings will remain intact
Use the software diskette provided to download the new software to your 926x
T1 Access Unit. Refer to Downloading Software, File Transfer, and Performing
an Upgrade in Chapter 5, Maintenance and Troubleshooting of the Technical
Reference.
NOTE:
If you maintain a backup copy of your configuration files, you should upload a
new backup copy of your configuration from the T1 access unit after you
upgrade to a new release of software. Refer to Backing Up Your
Configuration in Chapter 5, Maintenance and Troubleshooting of the
Technical Reference.
September 1997
1