Assigning Ocu-Dp Data Ports - Paradyne 9161 User Manual

Setting Up

Assigning OCU-DP Data Ports

"
5-46
Use the OCU-DP Port Assignments screen to view the status of:
H
All DS0 assignments on the Network interface
H
All DS0 assignments on the DSX-1 interface
You can also use this screen to assign OCU-DP data ports to:
H
Network interface time slots
H
DSX-1 interface time slots
NOTES:
You can assign OCU-DP ports to the DSX-1 interface on the 9161 Single
T1 NAM. OCU-DP port assignments on the Dual DSX APM are not
supported.
Procedure
1. Follow this menu selection sequence:
Configuration Edit/Display
2. The OCU-DP Port Assignments screen appears. Enter one of the following
into the Assign To field:
If you want to assign to . . .
Network interface time slots
DSX-1 interface time slots on the 9161
Single T1 NAM
3. Move the cursor to the next editable time slot (underlined). Use the spacebar
or type in the desired slot and port. Repeat this step until all desired time
slots are assigned.
4. Select Save to save the assignments, or press ESC to save and return to the
Cross Connect menu.
Cross Connect
Then enter . . .
Net1 or Net2
DSX01-1
April 1999
OCU-DP Port Assignment
9161-A2-GH30-40