Paradyne 9161 User Manual page 171

"
9161-A2-GH30-40
Procedure
Upon beginning a session, the User Interface Idle screen is displayed. To
activate:
1. Press Enter.
2. One of the following occurs:
If . . .
Security is disabled
Security is enabled
You are attempting to
access through Telnet
and the user interface is
currently in session
You are attempting direct
access through the COM
port and the user
interface is currently in
session via an in-band
Telnet session
The T1 access unit has
the Communication Port
and Login Required
configuration options
enabled and there is no
contention for the user
interface
Then . . .
The Main Menu screen
appears.
You are prompted for a
login ID and password.
The message
Connection
refused: appears. (T1
access unit allows only
one connection at a
time.)
The message User
Interface Already
In Use appears with
the active user's IP
address.
The Login screen
appears.
April 1999
Operation and Maintenance
What to do now?
Begin your session.
Enter your ID and password.
If Invalid Password
appears, see System Error
Messages in Chapter 9,
Troubleshooting .
Wait and try again.
System Status
See
Messages
in Chapter 7,
Displaying System
Information .
Enter your ID and password.
If Invalid Password
System Error
appears, see
Messages in Chapter 9,
Troubleshooting .
8-3