Install The Access Panel - HPE ProLiant ML110 Gen11 User Manual

Install the access panel

Install the access panel
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static- CAUTION:
sensitive devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Position the access panel on the chassis, and then slide it toward the front panel.
2. Tighten the access panel thumbscrew.
HPE ProLiant ML110 Gen11 Server User Guide 57