Install The Access Panel - HPE Apollo DX2000 User Manual

11. Remove the chassis from the rack.
12. Remove the access panel:
a. If necessary, use a T-15 Torx screwdriver to unlock the access panel latch.
b. Press the release button and pull up the latch to disengage the access panel from the chassis.
c. Lift up the rear side of the access panel to remove the panel from the chassis.

Install the access panel

Procedure
1. Install the access panel:
a. Place the access panel on top of the chassis with the latch open.
b. Close the access panel latch.
39
Operations