Install The Access Panel - HPE ProLiant DL20 Gen10 Plus User Manual

Install the access panel

Install the access panel
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. With access panel latch open, insert the guide pin on the chassis through the hole on the access panel latch.
2. Close the access panel latch.
The access panel slides to a closed position.
3. Lock the access panel latch.
4. Perform the post-installation or maintenance steps required by the procedure that necessitates the removal of the access panel.
Install the access panel 46