Acoustic Indicators - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Appendix A
Status
flashing orange
orange on
18.2.4

Acoustic indicators

PEI Beep Codes
Pre-EFI Initialization (PEI) - memory Initialization (bootblock)
# of Description
Beep
1 Memory not installed
DXE Beep Codes
Driver Execution Environment (DXE) - main hardware Initialization (POST)
# of Description
Beep
1 Invalid password
6 BIOS flash update is
failed
554
Description
An overload has been detected. The PSU is still running,
but failure might be imminent.
A PSU failure has been detected.
Action
▶ Check if the memory module is
▶ Check if the memory module is
Action
▶ Check for the correct password and try
A processing bar and an error message is
displayed on the screen.
This beep code is only an information.
Upgrade and Maintenance Manual
installed.
installed correctly.
again. Make sure that the caps lock key
is deactivated.
RX2540 M7