Installing A Riser Module - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Basic hardware procedures
4.10.2

Installing a riser module

Installing the riser module 1
Figure 26: Installing the riser module 1
▶ Insert the riser module 1.
▶ Fasten the riser module 1 with the knurled screw (see circle).
▶ If applicable, connect internal cables to the expansion card or GPU card.
For the cable plan, see "Appendix B" on page 559.
▶ If applicable, connect an FBU cable to the RAID controller, see
"Installing
an FBU" on page 321.
74 Upgrade and Maintenance Manual RX2540 M7