Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 377

CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
▶ If applicable, remove the riser module 1, see
page 72.
Removing the LC kit
▶ Remove the crossbar, see
▶ Remove the rear air grid 2, see
▶ Remove the OCP dummy cover or the OCP module, see
OCP dummy cover" on page 263
page 265.
RX2540 M7
50.
80.
"Removing the crossbar" on page
"Removing the rear air grid 2" on page
or "Removing an OCP module" on
Upgrade and Maintenance Manual
Liquid cooling (LC)
47.
89.
50.
55.
"Removing a riser module" on
83.
86.
"Removing the
377