Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 294

Expansion cards and backup units
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove all riser modules, see
▶
"Removing an expansion card from a riser module" on page
▶ If necessary, remove the cables from the expansion cards.
▶
"Removing the air duct" on page
Removing the defective GPU card
▶ Remove the GPU card, see
page 290.
Installing the new GPU card
▶ Install the GPU card, see
page 284.
Concluding steps
▶
"Reassembling" on page
▶ Connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ If applicable, update the system information of your server using the Chassis
ID Prom Tool, see
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
294
50.
"Removing a riser module" on page
80.
"Removing a GPU card from a riser module" on
"Installing a GPU card in a riser module" on
59.
71.
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
89.
50.
55.
65.
98.
107.
49.
72.
313.
71.
113.
RX2540 M7