Removing the ODD dummy cover
Figure 256: Removing the dummy cover
▶ Pull the dummy cover out of the bay.
CAUTION
▶
Keep the dummy cover for future use.
▶
If you remove the accessible drive again and do not replace it with
a new one, the dummy cover must be reinstalled to comply with
EMC regulations and to satisfy cooling requirements and fire
protection measures.
Installing the ODD
▶ If no ODD has been installed before:
▶ Remove the two screws and take the ODD latch from the chassis (see
Figure
246).
RX2540 M7
Upgrade and Maintenance Manual
Accessible drives
403