Connecting The Power Cord (Dc Psu) - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 19: Securing the power cord with the hook-and-loop tape (B)
▶ Secure the mains connector of the power cord with the hook-and-loop tape.
4.7.2

Connecting the power cord (DC PSU)

Example DC PSU -48 V
CAUTION
The DC PSU adjusts automatically to any mains voltage in the range
from -40.5 V - -57 V.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
68 Upgrade and Maintenance Manual RX2540 M7