Handling The Cpu Dummy Cover - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Processor (CPU)
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
▶
"Resuming BitLocker functionality" on page
11.4

Handling the CPU dummy cover

CPU dummy cover overview
The CPU dummy cover is used in specific configurations to prevent any
unexpected thermal conditions. It is not installed in the system as
standard.
If you add or remove a CPU dummy cover, use the Chassis ID Prom
Tool to update the system information.
362
79.
59.
65.
71.
Upgrade and Maintenance Manual
107.
RX2540 M7