Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 513

After replacing the system board the backup data is restored from the Chassis
ID EPROM to the new system board.
MAC addresses will be changed by replacing the system board. Inform
the customer about that before starting these tasks. After doing these
tasks, inform the customer about the changed MAC addresses.
Notes on network settings recovery
When replacing the system board, network configuration settings in the
OS will be lost and replaced by default values. This applies to all static
IP address and LAN teaming configurations.
Ensure to note down your current network settings before replacing the
system board.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Disconnect all external cables.
▶ Remove all PSUs, see
▶ If applicable, remove the OCP module, see
page 265.
▶
"Getting access to the component" on page
RX2540 M7
50.
"Removing a hot-plug PSU" on page
Upgrade and Maintenance Manual
System board and components
47.
89.
50.
"Removing an OCP module" on
55.
49.
129.
513