Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 300

Expansion cards and backup units
▶ Place the internal RAID riser module on the three bolts (1).
▶ Push the internal RAID riser module to the front to engage the holes and the
bolts (2).
▶ Fasten the Internal RAID riser module with the knurled screw (see circle).
Installing the RAID controller
▶ Please read the documentation supplied with the RAID controller.
▶ If applicable, remove the slot bracket from the RAID controller, see
"Removing slot brackets" on page
Figure 172: Installing the RAID controller
300
252.
Upgrade and Maintenance Manual RX2540 M7