Replacing A 2.5-Inch Pcie Ssd Module - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Figure 88: Installing the 2.5-inch HDD/SSD dummy module
▶ Push the dummy module into the empty bay until it engages.
▶ If applicable, insert the dummy lock.
Concluding steps
▶ If applicable,
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
7.6.7

Replacing a 2.5-inch PCIe SSD module

Customer Replaceable
Unit (CRU)
Tools: – Installation frame included: tool-less
– Installation frame excluded: Phillips PH1 / (+) No. 1 screw driver
190 Upgrade and Maintenance Manual
71.
71.
Hardware: 5 minutes
RX2540 M7