Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 159

Hard disk drive (HDD) / solid state disk (SSD)
Figure 67: Removing the 10x 3.5-inch HDD backplane
▶ Release the eight screws (see circles).
▶ Take out the HDD backplane at a slight angle.
Installing the new 10x 3.5-inch HDD backplane
Figure 68: Installing the 10x 3.5-inch HDD backplane
▶ Insert the HDD backplane into the chassis.
▶ Fasten the eight screws (see circles).
▶ If applicable, install the internal RAID riser module, see
"Installing an
internal RAID riser module" on page 297.
RX2540 M7 Upgrade and Maintenance Manual 159