4.8
Switching on the server
CAUTION
▶
Before switching on the server, make sure the top cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
▶
For more information, see
▶ Press the On/Off button to start up the server.
▶ Ensure that the power-on indicator is lit green.
4.9
Installing the front cover with lock
Figure 22: Installing the front cover with lock
▶ Attach the front cover in a slight angle to the front (1).
▶ Align the front cover to the front. The lock on the left side must be pushed in
(2).
RX2540 M7
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
33.
71