Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 446

Accessible drives
Removing the RDX drive
Figure 296: Disconnecting the cables from the RDX drive
▶ Disconnect the power cable from the RDX drive (1).
▶ Disconnect the end of the power cable from connector "PWR6" on the
system board.
▶ Disconnect the USB cable from the RDX drive (2).
▶ Disconnect the end of the USB cable from connector "USB 3.0" (see close-
up) on the system board.
446 Upgrade and Maintenance Manual RX2540 M7