Thermal Sensor; Replacing The Thermal Sensor - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

14

Thermal sensor

14.1

Replacing the thermal sensor

Field Replaceable Unit
(FRU)
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Phillips PH1 / (+) No. 1 screw driver (for the thermal sensor)
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable,
"Removing the riser module 2" on page
▶
"Removing the fan cage" on page
▶
"Removing the air duct" on page
▶ Remove all HDD modules, see
page 180 or "Removing 3.5-inch HDD modules" on page
The proceeding for installing/removing is identic for the 2.5-inch or 3.5-
inch HDD configuration.
RX2540 M7
50.
76.
80.
"Removing 2.5-inch HDD/SSD modules" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
47.
50.
55.
73.
153.
49.
455