Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 66

Basic hardware procedures
Using a cable clamp
Figure 16: Locking the cable clamp of a PSU
▶ Pull the cable clamp up (1).
▶ Thread the power cord through the cable clamp (2).
▶ Press the cable clamp down until it engages to secure the cable (3).
Using a hook-and-loop tape
Figure 17: Example PSU with hook-and-loop tape
1 Hook-and-loop tape
66 Upgrade and Maintenance Manual RX2540 M7