Switching Off The Id Indicator - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Basic software procedures
▶ Confirm with the customer whether the onboard LAN controller you have
replaced has been used as part of a LAN teaming configuration.
▶ If LAN teaming has been active, you will need to restore the configuration
using the LAN driver utility or OS teaming software.
For more information, see the relevant LAN driver manual.
5.3.17

Switching off the ID indicator

▶ Press the ID button on the front panel, or use the iRMC S6 web interface or
the Infrastructure Manager to switch off the ID indicator after the
maintenance task has been concluded successfully.
For more information, see
the "ServerView Suite Local Service Concept (LSC)", the iRMC user
guides or the Infrastructure Manager documentation.
Using the ID button on the front panel
▶ Press the ID button on the front panel to switch off the ID indicators.
Using the ID icon in the iRMC S6 web interface
▶ Log in to the iRMC S6 web interface.
The icon that represents the ID indicator resides on the right of the menu
bar. Its color symbolizes its status:
blue: the ID indicator is on.
grey: the ID indicator is off.
▶ Click the icon to switch the ID indicator on or off.
Using the Infrastructure Manager
▶ To switch off the ID indicator from the Infrastructure Manager, select a node
from the Node List screen and operate the ID indicator from the Action
button.
116
"Locating the defective server" on page 47
Upgrade and Maintenance Manual
or
RX2540 M7