Tools:
– Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Torx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶
"Checking boot priority" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
Removing the defective ODD
▶ Remove the ODD, see
page
396.
Installing the new ODD
▶ Install the ODD, see
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX2540 M7
93.
50.
76.
"Removing the ODD (2.5-inch chassis)" on
"Installing the ODD (2.5-inch chassis)" on page
77.
59.
65.
71.
Upgrade and Maintenance Manual
47.
92.
89.
50.
55.
Accessible drives
49.
391.
71.
401