Removing The Air Duct - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Basic hardware procedures
Installing the GPU air duct
Figure 33: Installing the GPU air duct
▶ Install the GPU air duct.
Ensure that the GPU air duct engages in the guiding points (see
circles).
▶ If applicable, install all riser modules, see
page 72.
If there is an FBU installed, see
holder" on page
4.12.2

Removing the air duct

CAUTION
▶
Be careful with the FBU cable.
▶
If an FBU is installed, first follow the procedure that is described in
"Removing the FBU with the FBU holder" on page
80
"Installing the FBU with the FBU
325.
Upgrade and Maintenance Manual
"Handling riser modules" on
327.
RX2540 M7