Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 196

Hard disk drive (HDD) / solid state disk (SSD)
Installing the new 8x 2.5-inch HDD backplane
Figure 93: Installing the 8x 2.5-inch SAS HDD/SSD backplane
▶ Position the HDD backplane on the two hooks (see orange circles).
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
into the guide pins.
▶ Fasten the screw (see circle).
▶ If applicable, install the internal RAID riser module, see
internal RAID riser module" on page
▶ If applicable, install the SAS expander board holder, see
expander board holder" on page
Figure 94: Connecting cables to the 8x 2.5-inch HDD backplane (example onboard SATA)
196
297.
205.
Upgrade and Maintenance Manual
"Installing an
"Installing the SAS
RX2540 M7